Airmatic pump - replacement seal kit

Page may contain affiliate links. Please see terms for details.

Lenny63

MB Enthusiast
Joined
Jul 6, 2012
Messages
1,428
Location
Belfast
Car
CLS 55 AMG | S211 E280 Cdi Sport
Hi All

I can hear my pump getting a little noisier so I was going to do a DIY and replace the seals in it.

I'm pretty certain the car has the factory installed pump and she's now 11.

If anyone can give me some hints & tips that would be great

1st stop - does anyone have a link for the w219 repair/seal kit?

2nd stop - when I disconnect the pump is the car going to slap bottom on the ground?

Thank you

Lenny
 
I got the kit for mine, No the car wont drop to the ground, i tried to do mine whilst on the car, The 6mm bolts i think they were snapped! despite soaking them prior with wd40.

So i still ended up with Buying a new Compressor, Which was a doddle to fit.

Just to add if you do fit it one, have the car on axle stands "just incase":D
 
Did you find the bracket was rusted ?
 
No Lenny63 the bracket was fine, Just the compressor head retaining bolts had corroded in the alloy, I thought they had cracked off but then as i put a little more pressure on them they snapped.
 

Users who are viewing this thread

Back
Top Bottom