Amp activation - Android install.

[bconnelly]

I have replaced my NTG1 head unit with an Android 5.1 system. I also bought the MOST fibre optic adaptor to avoid the need for a new 6M loom to the boot and use the factory Becker AGW. I've connected everything up as instructed but not getting any audio. Can anyone tell me if the AGW requires a trigger/activation feed and if so, do you know what wire to feed from the dash?

 

[bconnelly]

Managed to figure it out myself. For anyone else interested, the pink wire on the plug connecting the fibre optics to the head unit must be switched to ground to waken up the AGW in the boot.