any 1 with a 300/w124

[arkamelis]

hi there
im after a mesurement if possible. want the lenth of the boot, and then lenth to the edges, of the rear of car, hopfully the crude drawing iv done on windows paint might help, i need them for a boot spoiler im measureing up.

thanks fro any help

 

[arkamelis]

couldnt get windows paint file to upload.will try another option

 

[EDZ649]

I have a 320e so I guess it's the same.

 

[arkamelis]

anyone with a w124/300

hi if you have a 300/w124 could you measure these points for me shown in the picture below, has im after a boot spoiler that i have seen on this model and want to work out weater it would fit my 2001 e320 cdi.

thank you for any help.
matt

 

[arkamelis]

hi edz469
i guess it would be the same has the w124 wouldnt it ? , the one that i saw this spoiler on looked like the back of a 190 or similar. on the web site where i have seen this spoiler it just says 300/w124

 

[EDZ649]

Mine is a W124 (320e). I have just measured mine as acuratley as I can given that mine has a duck tail spoiler mounted!

The distance from boot edge to boot edge is approx 1210mm and the overall width is approx 1410mm.

Don't forget the W124 boot tapers in whereas the W210 is much more straight.

 

[d w124]

arkamelis:You`re not thinking for a ducktail in your car are you?

 

[arkamelis]

no not a duck tail d w124, i would just like to put a boot spoiler on to give it a bit more of a nicer look than the taxi look if you get what i mean.

hi edz649
thanks for the quick responce, and thank you for the measurements, i know what you mean by the taper differance on the boots, but its just the lenth which is more important, has where i would attach the spoiler would fall inbetween the boot. if all goes well i will for sure put pics on, once again thank mate.

matt