Anyone know where this pipe goes to - 300 24v

Page may contain affiliate links. Please see terms for details.

poormansporsche

MB Enthusiast
SUPPORTER
Joined
Jul 1, 2010
Messages
4,077
Car
W209
alright,

the cold air feed pipe as i dont actually have one :)

kgrhquokpie4jh5tcg8boqv.jpg


cheers

Brett
 
It goes to the air scoop on the right of the radiator. ;)
 
I have the same engine squeezed into a 190 , it has the same air box as the pic above but no cold air feed at all just the opening of the box. There's not enough room to do a crossover pipe to the other side of the bay and I'm at loss where to put a pipe on the original side :(
 
The standard inlet is a slot at the off side of the radiator but if you have shoehorned in a wider radiator and changed the radiator side mouldings there may not be room.You might be able to fabricate a duct which draws air from below the bumper or maybe along slot under one of the lights. Problem might be ingestion of standing water- benefit would be an engine fed with nice cold air?
 

Users who are viewing this thread

Back
Top Bottom