APS 4 wire to Handsfree kit

[pouzada]

Hi,

Can anyone tell me which wire of the APS4 radio should I connect to the handsfree kit to mute during a call?

Regards

Pouzada

 

[Nibbo]

On the standard ISO connector it would be Orange.
You could test it by earthing it while the radio is on but please don't blame me if you blow a fuse.

 

[pouzada]

On the standard ISO connector it would be Orange.
You could test it by earthing it while the radio is on but please don't blame me if you blow a fuse.

Ok,

I'll try it. Should it have any voltage?

Thanks

Pouzada

 

[Diesel Benz]

The mute signal is (almost) always an open collector type input with a pull-up resistor. So you would see about +12V when the radio is not muted and about ground when muted.

I'll have a look at the wire colour to be sure, in a moment.

OK, the mute wire should be a pin 3 on the A-connector, a yellow wire with a black stripe.

 

[pouzada]

The mute signal is (almost) always an open collector type input with a pull-up resistor. So you would see about +12V when the radio is not muted and about ground when muted.

I'll have a look at the wire colour to be sure, in a moment.

OK, the mute wire should be a pin 3 on the A-connector, a yellow wire with a black stripe.

Hi,

Thank you!

Pouzada