Anyone know how to remove the back seat cushion in a 208 CLK as my brother dropped a clip down it when installing a CD changer in the boot?
Back seat cushion in 208 CLK Coupe
Sp!ke
Administrator
Just guessing that it might be the same as on a W124 Coupe...
If this is the case then on each seat base there should be a little clip at the bottom front, middle of each cushion. Release clip and lift base. The back is held on at the base by a little 8mm bolt.
If this is the case then on each seat base there should be a little clip at the bottom front, middle of each cushion. Release clip and lift base. The back is held on at the base by a little 8mm bolt.
GrahamC230K
MB Enthusiast
- Joined
- Jul 14, 2002
- Messages
- 9,755
- Car
- Audi A3 & S4 quattro
Sp!kes description is very much like it is on a w202, apart from there is no centre clip.
OP
OP
Thanks guys. It seems to be different to the C Class. The seats are 'anchored' at each side with no visible bolt/clip and the seat backs fold in a 60/40 split.
Anyone have any ideas?
Anyone have any ideas?
Paul
Active Member
On my car it's achored by a hidden lever in the front corners. You have to put hand up in between carpet and seat base.
The hand book shows this, but then it maybe because my battery is under there.
The hand book shows this, but then it maybe because my battery is under there.
OP
OP
Not sure that works as the battery is in the boot of the CLK
OP
OP
Dealer found out how after 1/2 an hour of trying, even with the instructions!
The release is on the front of the left and right of the rear seat cushion. It feels soft and it is!! The applied presure will eventually release the cushion mechanism with a slight 'click'.
The thing to realise is that there is nothing to indicate that you are pushing the right spot until it 'clicks'!!
Thanks everyone for your help.
The release is on the front of the left and right of the rear seat cushion. It feels soft and it is!! The applied presure will eventually release the cushion mechanism with a slight 'click'.
The thing to realise is that there is nothing to indicate that you are pushing the right spot until it 'clicks'!!
Thanks everyone for your help.
craigyb
Active Member
Jeeze, I'm glad I found this post yesterday. Was fitting a PC in the boot and didn't know how to get the rear seat up to feed the cables to the front.
Cheers
Craig
Cheers
Craig
