Bellhousing oily (w210)

Page may contain affiliate links. Please see terms for details.

horatio

MB Enthusiast
Joined
Apr 11, 2011
Messages
1,034
Location
herts
Car
CLK, 190E
The bottom of my w210's bellhousing has a wet/oily patch (oil not atf). Is this something to worry about or a case of they all do that?

thanks
 
Unless in needs topping up with oil more often than usual, I wouldnt worry about it.
 
Thanks, did a bit of googling and it seems quite a few have the same but didn't notice it get any worse. It isn't even dripping, just wet.

Will move my paranoia to the original (!) crank pulley and belt tensioner! :D
 
It will probably be the rear main oil seal.

If it forms a drip, get it sorted as it can get worse and get on the exhaust and be a bit smelly.
 
horatio said:
Hi thanks I will keep an eye on it and hope for the best- I doubt removing the trans to get at it is cheap :(

This car in the atf change thread seems to be inflicted as well

http://i830.photobucket.com/albums/zz226/BlackC55/ATF/DSCF4962.jpg

That's a very minor sweat. I wouldn't call that a leak!
 

Users who are viewing this thread

Back
Top Bottom