Belt squeal after pulley change M113K

Page may contain affiliate links. Please see terms for details.
So, today’s the day the aux belt shred itself. Took the supercharger belt off too.

Does someone know the common reasons a belt would shred?
 
Check free movement of water pump, and also alternator power steering pump with belt off most liklely one of them is the culprit! good luck dave
 
Any chance of a picture of the break, may yield a clue? I still think there is a pully out of alignment though. Grab a straight edge and lay it across the front of pairs of pulleys and see if it lays flat, if you have access to a laser level or pointer then use that to project a line across all of their front edges at once. At least that will eliminate a common cause.
 
belt1.jpgBelt2.jpg
Belt3.jpg
Betl4.jpg
Belt5.jpg
Belt6.jpg
Belt7.jpg
Belt8.jpg
Belt9.jpg
Belt10.jpg
Belt11.jpg
Belt12.jpg
Belt13.jpg
 

Attachments

  • belt1.jpg
    belt1.jpg
    634 KB · Views: 1

Users who are viewing this thread

Back
Top Bottom