Bodywork corrosion/winter
- Thread starter CKLclive
- Start date
Page may contain affiliate links. Please see terms for details.
RobinEssex
New Member
- Joined
- Aug 27, 2011
- Messages
- 11
- Car
- n/a
Hi Clive, i think i will be in touch very shortly as i would like you to have a look at the inner lip of my rear arches which has some surface rust coming through and would like to nip in the bud, i'm not too far from you! Cheers, Rob
pimpmyc250td
Active Member
thanks clive
did as you say, now done all the prep on my w202 arch lips, those weetabix discs are great,
think i caught my car just in time. wings were removed in the end, as rust had crept round a bit further than i could originally see, only on side though, came up remarkably clean for a 16 yr old car..
i used "ph down" as the phosphoric acid wash, purchased from a local "grow shop" then bilt hamber hydrate 80, followed by bilt hamber 2 pack epoxy mastic, wings now drying off,
next step, then bilt hamber dynax UB , put wings back on, then its off to the paint shop
did as you say, now done all the prep on my w202 arch lips, those weetabix discs are great,
think i caught my car just in time. wings were removed in the end, as rust had crept round a bit further than i could originally see, only on side though, came up remarkably clean for a 16 yr old car..
i used "ph down" as the phosphoric acid wash, purchased from a local "grow shop" then bilt hamber hydrate 80, followed by bilt hamber 2 pack epoxy mastic, wings now drying off,
next step, then bilt hamber dynax UB , put wings back on, then its off to the paint shop
Last edited:
