Brake fluid change SL R129

[RichardF]

Hi I have a 94 R129 SLwith ETS. Can I use my Eezybleed with this?

The Eezybleed will operate up to 20psi, although due to it's flimsy nature I prefer to keep it below 15.

I've heard R129s should be bleed @ 2 bar although I'm not sure if that's just for the ASR/ESP models.

 

[IanW]

I've routinely used my Eezibleed at 25-30 psi without any problems (2 x old Audis, MR2, CLK).

I think the issue is pressure forcing the brake fluid reservoir away from the master cylinder. A couple of tie-wraps makes sure that doesn't happen.

Ian.

 

[flango]

^ As above always use Eezibleed above 30 psi, no issues either.

 

[RichardF]

Thanks chaps. The last time I used the ezybleed at a higher pressure one of the pipes came off and it ****** fluid all over the place.

 

[RichardF]

15 PSI worked fine on these.