• The Forums are now open to new registrations, adverts are also being de-tuned.

Brembo Pads And Wear Sensor

DreamCar

Active Member
Joined
Mar 11, 2008
Messages
101
Looks like I need new brake pads.... Do the Brembo ones come with wear sensor or do I need to order the sensor separately?
 


I take it those Pagid ones can be used with Brembo pads? I just order one for front and one for back?
 
I expect any wear sensor that is compatible with the car will work with any brake pads - the principle is the same regardless of pad. I run Brembo pads but use Merc wear sensors, they are less than £10 and you know for sure that they will work properly, however if you preferred to go Pagid I don't think you would have any issue

And yes 1 for each axle
 
I expect any wear sensor that is compatible with the car will work with any brake pads - the principle is the same regardless of pad. I run Brembo pads but use Merc wear sensors, they are less than £10 and you know for sure that they will work properly, however if you preferred to go Pagid I don't think you would have any issue

And yes 1 for each axle
Fantastic, thank you.
 
Are they dusty pads ?
I clean them every couple of weeks with soap and water and wax them every 6 months when I rotate summer to winter wheels . I would say what is on the wheels is road dirt rather than brake dust .
I‘m guessing if they were throwing off a lot that would be a lot more stubborn than road dirt ?
 
I find them no dustier than the Merc pads.
So plenty if you brake often hard and often, not much if you use them lightly.
I have dusty wheels.
 
^ this dramatic difference in dust that leaves the mind boggling why ordinary pads would ever be purchased .


43b97c2b5cf2b59bd438a4e7ca2dde2e.plist.jpgScreenshot_20210516-150400_Chrome.jpg
 

Users who are viewing this thread

Back
Top Bottom