• The Forums are now open to new registrations, adverts are also being de-tuned.

C class coupe w204

Ash1chil

New Member
Joined
Aug 17, 2019
Messages
9
Location
Manchester
Car
C220 cdi Amy sport coupe
hi , new here just wondering if anyone has had this issue and might be able to help, between 60-80mph seem to have a vibration through seat/steering/car, I’ve had front and rear wheels balanced , 1 rear needed a fair bit of weight adding , new brakes and discs all round , propshaft centre bearing didn’t appear to have too much play , engine mounts don’t appear to be leaking . Tyres are all fairly new , bit of a dddddddddddddddddddddddddddddddddddddddd noise at that speed , I’ve no clunks or bangs or knocking just cannot find the issue and as I’m on motorway a few times a week it’s becoming annoying, any ideas ?

Thanks in advance
 
I had the same issue after getting new tyres fitted all round, including balancing. I took it back to where I had the tyres fitted and got someone else to rebalance the fronts, that turned out to be out quite a bit. They weren’t able to explain why they got it wrong first time but made some feeble excuses about having tried to only place the weights on the inside edges of the rims so they were less easy to see. Anyway, after getting them balanced the second time everything was fine. Might be worth getting your front wheels checked again if you’re feeling the vibration through the steering.
 
I had the same issue after getting new tyres fitted all round, including balancing. I took it back to where I had the tyres fitted and got someone else to rebalance the fronts, that turned out to be out quite a bit. They weren’t able to explain why they got it wrong first time but made some feeble excuses about having tried to only place the weights on the inside edges of the rims so they were less easy to see. Anyway, after getting them balanced the second time everything was fine. Might be worth getting your front wheels checked again if you’re feeling the vibration through the steering.
Thanks for info, I will try that next and see how it goes
Cheers
 

Users who are viewing this thread

Back
Top Bottom