Hello, I have a heating issue with my C180 Kompressor (55 plate) - purchased in the summer of 2015, hence only noticing this problem now. Any assistance would be appreciated.
Two issues:
1) Need to have car running stationary for about an 45 mins for it to warm up enough for the needle on the temp gauge to show any significant temp rises but even for the hot air to filter into the car.
2) Then after driving the temp gauge will fall (understandably) but not to the 'Cold' position and because of this the hot air ceases to come through.
Water in engine bay at the right levels/air con works fine so I'm assuming that this is thermostat issue?
Look forward to hearing from anyone who has experienced the same issues.
Two issues:
1) Need to have car running stationary for about an 45 mins for it to warm up enough for the needle on the temp gauge to show any significant temp rises but even for the hot air to filter into the car.
2) Then after driving the temp gauge will fall (understandably) but not to the 'Cold' position and because of this the hot air ceases to come through.
Water in engine bay at the right levels/air con works fine so I'm assuming that this is thermostat issue?
Look forward to hearing from anyone who has experienced the same issues.
