C200K 2001 New Shape ' SRS Restraint System Visit Workshop ' Message!

Page may contain affiliate links. Please see terms for details.

shairaz

New Member
Joined
Jul 20, 2006
Messages
8
:mad: HI

Its a C200K new shapeon a 01 X Plate, what happens is when I start the engine, the SRS light stays off then the message appears re - SRS visit Workshop etc.... .

However, the error goes away whilst im driving then comes back on after a couple of minutes, then goes off again and on and off and on.......

I have checked the connectors under both seats and all is ok.

PS - NOT SURE IF ITS RELATED, BUT THE VOLUME CONTROLS AND THE HORN BUTTON ON THE RIGHT HAND SIDE OF THE STEERING WHEEL DO NOT WORK.

Any other ideas?

Thanks
 
Last edited:
The most likely cause is the passenger seat recognition pad.
 
It is a simple case of the steering spiral (a long coil inside the main cowling of the steering assembly) not working as it should or it being disconnected at some place.

The procedure to repair this is not complicated.
 

Users who are viewing this thread

Back
Top Bottom