C205 hub centre bore question

[SiW]

Ive been searching around for a definitive answer as to whether 66.5 centre bore spacers will be fine when the correct measurement on the c205 is actually 66.6. It seems it will be ok but what im not sure about is whether it means the spacers will be tight to get on the hub, or the wheels will be a hair loose on the spacers. Anyone have any wisdom to share?

Im looking at these H&Rs from Autodoc, because i want to space my rear wheels to better match the fronts https://www.autodoc.co.uk/h-and-r/13666407

TIA

 

[OneForTheRoad]

They wouldn't sell many if they didn't fit tbh. Your talking microns . Probably a rub with emery cloth would give you 66.5 on your mb hubs.

 

[SiW]

They wouldn't sell many if they didn't fit tbh. Your talking microns . Probably a rub with emery cloth would give you 66.5 on your mb hubs.

Appreciate the reply, and good points well made.
I wanted to sense check, as been caught out once before with a precision cut part that i assumed would “be ok”, but wasn’t.

 

[ALFAitalia]

Merc claim it as 66.5....so thats good enough really I guess.