• The Forums are now open to new registrations, adverts are also being de-tuned.

C215 cl600 power steering hose identification help

dsan

Active Member
Joined
Dec 24, 2010
Messages
85
Hello all, was hoping someone might have some experience/insight to help me out?

Had a hose blow, which I thought was ABC but upon replacing all the ABC lines and filling the system, it wasn't that but seemingly the pipe that sits inside the subframe, as far as I can tell (filled system, turned on and got a free green shower)

Now using the new EPC, that line looks like

31B56615-072C-41F7-A8E8-49109E79E236.png 578E101D-2013-45EA-98D6-5B6DC0A4DEC2.png

It's hard to see from EPC where exactly this sits in the car, so it could also be

56ACF5CF-A72A-455E-A83D-F80B431A91A2.png
8A0529E9-455E-403F-ACD4-EB7708E5E2BF.png

I hope this isnt the case as that is now confirmed by MB and MB Germany as the dreaded NLA

The leak looks like it is coming from the pipe here

Does anyone with experience in said pipes know exactly which one, to eliminate me buying a load of pipes?

Appreciate the help all, thanks

038F4C65-2A24-4F10-B19B-CDC1CC0888DC.jpeg
 
Hi, it’s much cheaper to go to a hydraulic specialist and have a custom one made up
 
Aware of that, the issue is this particular pipe is a sod to remove hence looking for which one it is first
 
Aware of that, the issue is this particular pipe is a sod to remove hence looking for which one it is first

The black ABC pipe shown in your picture above the red arrows is a common one to go.
 

Users who are viewing this thread

Back
Top Bottom