Morning,
Set off for a journey the other day to find the car would barely move forward, with massive misfiring! After clearing any existing codes and then running the car again, I came up with the following:
P0150 02 Sensor Circuit Malfunction (Bank 2 Sensor I)
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
P0304 Cylinder 4 Misfire Detected
P0305 Cylinder 5 Misfire Detected
P0306 Cylinder 6 Misfire Detected
P0300 Random/Multiple Cylinder Misfire Detected
When replacing the O2 sensor, I noticed that some of the connector block pins (blockside, near the wishbone) were corroded!
I fitted the plug anyway as time was running out, and after clearing the codes again and running the car (which was now noticable better, but not 100%) I'm left with:
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
My question is - how on earth do i go about replacing the connector, as it's part of a loom that is firmly tucked away in the car innards? Does anyone know if it's possible to get a repair kit, or am I faced with possibly wiring up my own weatherproof connector?
Set off for a journey the other day to find the car would barely move forward, with massive misfiring! After clearing any existing codes and then running the car again, I came up with the following:
P0150 02 Sensor Circuit Malfunction (Bank 2 Sensor I)
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
P0304 Cylinder 4 Misfire Detected
P0305 Cylinder 5 Misfire Detected
P0306 Cylinder 6 Misfire Detected
P0300 Random/Multiple Cylinder Misfire Detected
When replacing the O2 sensor, I noticed that some of the connector block pins (blockside, near the wishbone) were corroded!
I fitted the plug anyway as time was running out, and after clearing the codes again and running the car (which was now noticable better, but not 100%) I'm left with:
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
My question is - how on earth do i go about replacing the connector, as it's part of a loom that is firmly tucked away in the car innards? Does anyone know if it's possible to get a repair kit, or am I faced with possibly wiring up my own weatherproof connector?
