c32 crank pulley

Discussion in 'Engine' started by Hals1985, Jul 4, 2015.

  1. Hals1985

    Hals1985 New Member

    Messages:
    9
    Joined:
    Jul 4, 2015
    Car:
    c32 amg
    Hi guys hate to ask for assistance already but i need to get crank pulley changed over as the rubber on mine has started to protrude slightly. I bought the part (330 quid!), but don't really want to mess about fitting it myself as i don't have the crank pulley holding tool. Can anyone recommend a good independant garage in London to do the labour? Or does anyone near/in London have the pulley holding tool? Thanks
     
  2. AMGeed

    AMGeed MB Club Veteran

    Messages:
    12,326
    Joined:
    Nov 1, 2008
    Location:
    Bournemouth/Poole Dorset
    Car:
    2014 E63 Biturbo
  3. OP
    OP
    Hals1985

    Hals1985 New Member

    Messages:
    9
    Joined:
    Jul 4, 2015
    Car:
    c32 amg
    Thanks very much for the reply. One more question, i have changed a crank pulley before on a 300zx auto so might consider doing this job myself. To lock the crank in place i removed the starter motor and put a large sturdy screwdriver in the teeth that mate with the starter motor in the bell housing. I know this isn't the best method but It worked pretty well at holding the pulley still. But i dont fancy damaging the teeth so i was wondering if anyone had another method to use to lock the crank pulley in place if you don't have the mercedes tool? Thanks in advance guys
     
Tags:

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.