Hi guys hate to ask for assistance already but i need to get crank pulley changed over as the rubber on mine has started to protrude slightly. I bought the part (330 quid!), but don't really want to mess about fitting it myself as i don't have the crank pulley holding tool. Can anyone recommend a good independant garage in London to do the labour? Or does anyone near/in London have the pulley holding tool? Thanks
Page may contain affiliate links. Please see terms for details.
- Joined
- Nov 1, 2008
- Messages
- 18,880
- Location
- Bournemouth/Poole Dorset
- Car
- W210 E280 x2, w211 E55, W212 E63 biturbo, S204 C180K
Thanks very much for the reply. One more question, i have changed a crank pulley before on a 300zx auto so might consider doing this job myself. To lock the crank in place i removed the starter motor and put a large sturdy screwdriver in the teeth that mate with the starter motor in the bell housing. I know this isn't the best method but It worked pretty well at holding the pulley still. But i dont fancy damaging the teeth so i was wondering if anyone had another method to use to lock the crank pulley in place if you don't have the mercedes tool? Thanks in advance guys
