DRBC43AMG
MB Enthusiast
- Joined
- Mar 15, 2010
- Messages
- 1,118
- Location
- Switzerland, Locarno (TI)
- Car
- 2013 C63 AMG coupe "T-Rex", 1999 C43 AMG saloon "Grandma" (sold), Ultima Sports Can-Am (sold)
I am in the process of installing KW suspension on my c43 and will be finishing in 10 days or so when I get out of cardiac rehab and the chance of picking up my spanners....
I have already installed the rear suspension and I am a bit in the wild concerning base hight measurement between the adjustable pad and spring. The technical instructions given with the kit does not give much details apart from max and min adjustments. If anyone here has gone with this set-up on a similar car, I would greatly appreciate some words of wisdom in order to avoid doing multiple changes and tedious adjustments. Some fine tuning will obviously be necessary, but I don't want to spend days on end getting everything down to the mm. To start with I have put 15mm on the rear.
Thanks
P.S. Should I post this thread in the "Performance Lounge"?
I have already installed the rear suspension and I am a bit in the wild concerning base hight measurement between the adjustable pad and spring. The technical instructions given with the kit does not give much details apart from max and min adjustments. If anyone here has gone with this set-up on a similar car, I would greatly appreciate some words of wisdom in order to avoid doing multiple changes and tedious adjustments. Some fine tuning will obviously be necessary, but I don't want to spend days on end getting everything down to the mm. To start with I have put 15mm on the rear.
Thanks
P.S. Should I post this thread in the "Performance Lounge"?
Last edited: