Cable run for rear view camera

Page may contain affiliate links. Please see terms for details.

such01

Active Member
SUPPORTER
Joined
Jul 13, 2016
Messages
492
Location
Essex Coast
Car
E350 CDI W212
I'm attempting to install a RVC and would like to know which is the best route for the cable to the rear of the command unit.
I have a fakra to RCA cable arriving this week, for the command unit.

I intend to run the cable from the boot, under the sills and across to the command.
However, I cannot see an easy way to run from the passenger side under the glovebox. I have pulled down the carpet to have a look, but cannot see any way past the metal protective cover. I know this may need to be removed - i can see two securing points.

Is there a straight forward route?

Any help is much appreciated.

Thanks
 
Thanks, im looking for a route from under the glovebox into the command area.
There is no obvious "hole" leading through
 
Probably best to follow route of other existing wiring? Or you might find it easier and requiring less cable to go along the transmission tunnel and through the centre console?
 
Probably best to follow route of other existing wiring? Or you might find it easier and requiring less cable to go along the transmission tunnel and through the centre console?

I have the route in my head now, along passenger side sill, dropping the glovebox and hopefully I'll find a route through there.

Thanks
 

Users who are viewing this thread

Back
Top Bottom