changing rear suspension bushings

[shorty]

This week end I am planing to change some of the bushings in the rear suspension of my 210 . Im will be changing the bushings on the lower arm where the spring sits and on the tie rod that connects to the bottom of thehub . My question is has any one changed these bushings before and how hard was it to remove the old bushing and insert the new , will I need a press or will I get them in using a beanch vice . Thanks in advance Steve

 

[lynall]

Do you mean the subframe bushs? the large ones at the front.

If so i have a pdf doc i can send you if you pm me.

Its on a 190e but the principal is the same.




Lynall

 

[shorty]

Cheers Lynall im not doing the sub frame bushing , there ok , its the 2 on the lower arm and the 2 on the lower tie rod . Many thanks again for the reply and offer