• The Forums are now open to new registrations, adverts are also being de-tuned.

CL500 fault code help

Williburp

New Member
Joined
Oct 17, 2019
Messages
2
Location
Cornwall
Car
CL500
Hi all, I'm new to the forum so wasn't really sure where to put this.

I have a 2003 cl500 that I've recently bought, I've had some welding done on my car, I'm guessing the battery wasn't disconnected because things aren't working right. I put my icarsoft tester on and come up with some codes, B1853, B10DF, B1080, B1066, B1636, 9040 and P203A-008. My windows don't drop when I open the doors, the soft close boot has stopped working and the indicators no longer flash when locked but they do when unlocked

Any help would be greatly appreciated
 
Had you checked if any codes were stored before getting the welding done, have you tried clearing the codes, disconnecting and reconnecting the batteries (I think you will have two, same as my w216) this might reset the circuits.
in any case I would be talking to the welder, welding may have fried circuits or melted wires if precautions were not taken.
 
Yes mate, I managed to sort it. I cleared all codes, disconnected the battery for about an hour, reconnected it, now everything is working.

Thank you

Sent from my SM-G950F using Tapatalk
 
good one nice to hear it's working again, welcome to the CL class glitches.
 

Users who are viewing this thread

Back
Top Bottom