Cl55 amg

Page may contain affiliate links. Please see terms for details.

adam87

Active Member
Joined
May 2, 2010
Messages
252
Location
Portsmouth
Car
C200 Sport
Hello

Here are a few pictures of Peters(C43AMG) CL55 AMG from last week.

How it was before...


SAM_3990c.jpg




SAM_3994c.jpg




SAM_3995c.jpg




SAM_3997c.jpg






Before Polishing


SAM_4011c.jpg






After



SAM_4012c.jpg








50/50



SAM_4013c.jpg






Rear Quarter After



SAM_4035c.jpg




SAM_4039c.jpg




SAM_4040c.jpg

















Door After








SAM_4047c.jpg









Wing After



SAM_4043c.jpg





SAM_4044c.jpg





SAM_4045c.jpg















Bonnet After



SAM_4057c.jpg






SAM_4058c.jpg






SAM_4062c.jpg











Bad scratch right in middle of roof


SAM_4093c.jpg




SAM_4095c.jpg









Wet sanded with 3000 to save my back a lot of agro :rolleyes:



SAM_4096c.jpg






Scratch After (Not completely removed but 95% reduction off the eye)



SAM_4108c.jpg




SAM_4110c.jpg










Boot Before




SAM_4097c.jpg








Boot After




SAM_4098c.jpg




SAM_4127c.jpg





SAM_4130c.jpg
 
Last edited:
Very nice, and your CL has very good paint all over. Most CL's dont hold up this well mine included. Nice one, all you have to do now is lower it slightly (just my opinion) !!
 
Having done a CL500 and Cl55 as an amateur I know how much hard work goes into doing that. Big cars with very hard paint !

Well done
 
Looks good! What was the paint reading on the roof before you wet sanded?
 
Very nice! Well done:)
 
Very nice work indeed :)
 
Looks good! What was the paint reading on the roof before you wet sanded?

Thanks, roof was about 130 microns in that area before, but it had been painted at somepoint so I didn't want to go crazy removing lacquer. Only removed about 10 microns. I prefer to keep as much paint on the car as possible rather than shaving areas down and risking a strike through at a later date. :)
 
Thanks, roof was about 130 microns in that area before, but it had been painted at somepoint so I didn't want to go crazy removing lacquer. Only removed about 10 microns. I prefer to keep as much paint on the car as possible rather than shaving areas down and risking a strike through at a later date. :)

Sounds good. To be fair the maximum you want to be removing wet sanding is 10m, so good work, looks great!
 
As i mentioned before after Adam had done the S-class, what a great job. I am looking out of my study window at the CL in the Sunshine and it is sparkling.

Once again Adam many thanks for all your hard work.

If anyone needs there car detailing Adam is your man. ( Evidence above )
 

Users who are viewing this thread

Back
Top Bottom