Cla wheels

Page may contain affiliate links. Please see terms for details.

Bigdrew

Active Member
Joined
Jun 26, 2016
Messages
340
Location
Scotland
Car
Ml350 bluetec clk220 CDi w209 amg styling 18in amg wheels cla 220cdi amg sport c class w205 amg line
Hi want to change the wheels on my cla
at the moment the have 7.5j 52et would it be OK to fit 8j 48et without any problem plus would I still be able to use the original wheel studs
 
Hi want to change the wheels on my cla
at the moment the have 7.5j 52et would it be OK to fit 8j 48et without any problem plus would I still be able to use the original wheel studs
I would say yes, the offset difference is only 4mm which is nowt, I know it's a half inch wider, but again shouldn't be a problem, you should be able to use the same tyre too.
Check out willtheyfit.com and put your present set up and potential new set up in and it will tell you the different clearances etc. :) 👍
Oh, and if your changing to a OE Mercedes wheel you can use the same bolts, but if your changing to an aftermarket wheel then no you can't, aftermarket wheels need tapoured bolts.
 

Users who are viewing this thread

Back
Top Bottom