tudu
MB Enthusiast
I am about to order the CLK 63 AMG front bumper, but need the part no's: for the 2 adapter cables for foglights (think the CLK are H1 C55 is H7), and 2 front brackets for the 2 front bolts - anyone help?
CLK 63 AMG FRONT Bumper retrofit - C55
kjay
Active Member
CLK 63 AMG (chassis 209.377)
wiring harness/adapter line...
A211 540 81 09
Can you explain which brackets/bolts you mean?
.
wiring harness/adapter line...
A211 540 81 09
Can you explain which brackets/bolts you mean?
.
Last edited:
OP
OP
tudu
MB Enthusiast
Thanks Jay. Think there the 2 bolts that hold the bumper on, apparently they differ between CLK 63 and C55 (even though i have a W208 CLK front end). If the worst comes to it i might have to remove the front bumper and check whats there. The 63 BS fits but i would need to loose front foglights and do some serious bodywork to front wings to flare the arches.
Last edited:
Venomous
Active Member
More sexy mods! I knew it was only a question of time... 
So its a straight swap then? C55 to W209 - nice
OP
OP
tudu
MB Enthusiast
More sexy mods! I knew it was only a question of time...
Thanks. After a long think about the C63 its just too high priced for what i want with the options. So decided to stick with the C55 for at least couple of years as it meets most of my requirements at the mo.
I really like the CLK 63 BS front, and although it would fit i would loose fogs and need extensive bodywork done on front wings to flare the arches to meet the bumper. Without doing the rear arches the C55 would look a bit odd.
OP
OP
tudu
MB Enthusiast
Yep, apart from the adapter leads for the front fogs and 2 brackets and bolts its a straight swop luckily the C55 has CLK front end.
OP
OP
tudu
MB Enthusiast
Sorry , not with it today ...
Been varnishing a massive floor and my back aches ...
Ignore my ignorant ramblings please !
Thanks - well know the feeling.
kjay
Active Member
There's two M5x45 bolts listed on the 63 that aren't on the C55 drawings. They appear to be accessed from inside the wheel-arch.
Not sure if these are the ones you refere to.
.
Not sure if these are the ones you refere to.
.
OP
OP
tudu
MB Enthusiast
Cheers jay i will need to check - strange as when i did my headlight swap on my W203 C200K, i had to access the wheel arches to get at the bolt that holds the headlight in - wonder if this is the same bolt. The brackets and bolts i refer to i think are on the front of the bumper. I will check with SteveBenzNL as i think he has carried out this mod on a C55 in the states but i can't find any posts for it on MBWorld.
kjay
Active Member
Then they could be...
M5x16 or M6x12 - 4 of each.
These seem to be around the grill area ???
M5x16 or M6x12 - 4 of each.
These seem to be around the grill area ???
OP
OP
tudu
MB Enthusiast
Thanks. Are their brackets with them as well?
kjay
Active Member
The M5x16's have a 'sheet metal nut'
Part number A0049941245 - 4 of
.
Part number A0049941245 - 4 of
.
OP
OP
tudu
MB Enthusiast
Thanks.
