May 4, 2009 #1 X x332race MB Enthusiast Joined Dec 10, 2005 Messages 1,108 I have a broken lens on the front drivers side foglight on my CLK 500 (standard, not AMG kit)......can anyone tell me how I get to the foglight to replace the glass?
I have a broken lens on the front drivers side foglight on my CLK 500 (standard, not AMG kit)......can anyone tell me how I get to the foglight to replace the glass?
May 4, 2009 #2 whitenemesis MB Club Veteran SUPPORTER Joined May 7, 2007 Messages 20,009 Car Lexus RX450h F-Sport with Takumi Pack 2020 You will need to remove the inner wheel arch liner. It is recommended to replace the lens seal as well to prevent leaks Last edited: May 4, 2009
You will need to remove the inner wheel arch liner. It is recommended to replace the lens seal as well to prevent leaks
May 4, 2009 #3 OP OP X x332race MB Enthusiast Joined Dec 10, 2005 Messages 1,108 whitenemesis said: You will need to remove the inner wheel arch liner. It is recommended to replace the lens seal as well to prevent leaks Click to expand... Thanks..... How do I remove the inner wheel arch liner?? Is this obvious?
whitenemesis said: You will need to remove the inner wheel arch liner. It is recommended to replace the lens seal as well to prevent leaks Click to expand... Thanks..... How do I remove the inner wheel arch liner?? Is this obvious?
May 4, 2009 #4 whitenemesis MB Club Veteran SUPPORTER Joined May 7, 2007 Messages 20,009 Car Lexus RX450h F-Sport with Takumi Pack 2020 The liner is fixed using plastic 'rivets'. Grip the centre pin and pull to release then use a flat blade or pliers under the flange to prise them out. Suggest you get a few spares from the dealers, they are prone to breaking. Think they are ~10p each. I could send you a couple of docs on this if you PM your email address? Last edited: May 4, 2009
The liner is fixed using plastic 'rivets'. Grip the centre pin and pull to release then use a flat blade or pliers under the flange to prise them out. Suggest you get a few spares from the dealers, they are prone to breaking. Think they are ~10p each. I could send you a couple of docs on this if you PM your email address?