Command -> Pioneer - no power?!?!?

allias

Active Member
Joined
Nov 8, 2009
Messages
715
Location
Leeds
Car
00' W210 Est 320CDI
I decided to swap my Command over to Pionner. I connected it and no power. I did some digginf and found out that ILL & +12ACC i fed thru CANBUS. So I have problem to connect it. Someone suggested me to cross 12VBat over 12VACC but that will make it constant ON and I really would like to have it controled by ignition and have illumination while lights on.

Anyone have an idea for this? BTW. My ISO plug is only equiped with 12VBAT, remote, ILL and GND.

1. GND is OK
2. 12V is there and its fine.
3. ILL - no signal what ever I do.
4. Remote - is that for antena? How it works?
 
OP
OP
allias

allias

Active Member
Joined
Nov 8, 2009
Messages
715
Location
Leeds
Car
00' W210 Est 320CDI
£120 for CAN adapter????? OMG??? Now I understand why radio comes cheap for those cars. I think I will patch +12V from CIG LIGHTER cable. I dont use it and it 15A anyway.
 
OP
OP
allias

allias

Active Member
Joined
Nov 8, 2009
Messages
715
Location
Leeds
Car
00' W210 Est 320CDI
Resolved by getting power from CIG lighter. It all works nice. Very happy with this swap.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom