Could someone lend me a set of w202 speedo removal pins ??

[poormansporsche]

alright peeps,

like it says, im just plain rubbish at making anything ! and need to change some bulbs - and knowing me i will break the cluster without the proper tools will pay obviously !

cheers

brett

 

[renault12ts]

alright Brett,

These are very simple to make. Take two pieces of wire (coat hanger) and bend the ends over at 90 degrees (about 5mm). Job done.

 

[Alps]

just undo the panel below the drivers side and push the speedo out from each side.

 

[poormansporsche]

cheers mates, will give it a go

 

[Nasco12]

Isn't there a Dec-special HowTo on this somewhere?

 

[Dec]

Sometimes it can be difficult to push it out from behind so a combination of pulling with hooks and pushing from behind can be the best approach … http://www.mbclub.co.uk/forums/interior/83792-w202-dash-light-broken-how-replace.html


Dec

 

[poormansporsche]

thanks, missed that one

 

[Nasco12]

Deleted

 

[Will]

I'd go for pushing it out from behind - they're only held in with friction, easy to remove IMHO

Will