Current mobile with fault codes Errors

Page may contain affiliate links. Please see terms for details.

Rosso1

Active Member
Joined
Jun 29, 2016
Messages
341
Location
Essex
Car
SL500
When i purchased my car the phone in the center console does not seem to switch on and charge, the car is STILL giving the message "Tel Error - Tel not plugged in", .

So just ran a diagnostic via STAR on it and these are the 2 codes its come up with.

N1201 - The microphone line from component B25 (hands-free system microphone) to component A34/4 (CTEL interface) has a short circuit or an open circuit.

N1209 - Communication fault between component A34/4 (CTEL interface) and A34/6 (portable CTEL); component A34/4 (CTEL interface) is not compatible with component A34/6 (postable CTEL)

I guess the old phone does not hook up anymore maybe a flat battery to the phone that no longer charges, so would a ViseeO 3000 pick up my Sumsung Edge phone and should it be a plug and play?
Any help would be appreciated.:thumb:
 

Users who are viewing this thread

Back
Top Bottom