M.A.94
Active Member
- Joined
- Mar 2, 2016
- Messages
- 307
- Location
- Newcastle upon Tyne
- Car
- 2001 Mercedes E320 CDI (W210) OM613
I need some 20mm custom wheel spacers which will bolt onto my hub using m12x1.5 bolts and then my wheels would bolt onto the spacers using m14.1.5 bolts.
Centre bore on both my hub and wheel is 66.6mm and the PCD is 5x112.
So the only thing I need to change is the bolts for the wheels need to be m14x1.5 instead of the stock m12x1.5
So far the only company I can find is superforma but a bit sceptic about the quality of the spacer. What grade aluminium is safe to use for spacers as I could question the company on what they use for their spacers.
I think most companies use 6082 grade however this is just a number to me so could anybody shed some light on this.
Centre bore on both my hub and wheel is 66.6mm and the PCD is 5x112.
So the only thing I need to change is the bolts for the wheels need to be m14x1.5 instead of the stock m12x1.5
So far the only company I can find is superforma but a bit sceptic about the quality of the spacer. What grade aluminium is safe to use for spacers as I could question the company on what they use for their spacers.
I think most companies use 6082 grade however this is just a number to me so could anybody shed some light on this.