Display gone milky white after a frost

Page may contain affiliate links. Please see terms for details.

BillSparnon

New Member
Joined
Jan 8, 2021
Messages
2
Location
Hull
Car
W211 saloon
Hello everyone. Last night was a hard frost. This morning the centre of the Speedo that carries information and warnings has now gone milky yellow and I cannot see the information. Curiously when battery voltage is low as when parked with lghts on the display returns to near normal. After a few minutes running returns to milky white. Anyone had a similar experience please? 2006 W211 saloon e280 CDI 151k miles. It's a bit worrying.
 
Hello again. Regarding the milky white display strangely it has returned to normal after a few days driving. Possibly a warm and dry interior may have helped. Hoping this is not going to reoccur. Hope this gives someone some encouragement. Bill
 
Hello again. Regarding the milky white display strangely it has returned to normal after a few days driving. Possibly a warm and dry interior may have helped. Hoping this is not going to reoccur. Hope this gives someone some encouragement. Bill
Good cheap fix buddy :)
 
Suggest you use a hair dryer if it happens again.:D
 

Users who are viewing this thread

Back
Top Bottom