E Class C238 Reversing camera stopped working

[Allpag]

Hi All.

I have a 2017 E class coupe (C238) with the rear reversing camera that pops out from under the rear badge.

Noticed a couple of weeks ago while car was parked on the drive that the rear badge was open and camera was in the out position. This rectified itself when car was driven.

A few days later, the rear camera stopped working - badge doesn't lift and camera doesn't move to the out position. Display screen changes when putting vehicle into reverse, but is just showing dark screen.

Had a quick look at the fuse box located in the boot space and all fuses ok.

Does anyone have a wiring diagram showing rear camera details?

Also, looking for any information relating to wiring route within the boot lid/space so that I can check for cable damage?

Thank you.

 

[Peakie]

Hi All.

I have a 2017 E class coupe (C238) with the rear reversing camera that pops out from under the rear badge.

Noticed a couple of weeks ago while car was parked on the drive that the rear badge was open and camera was in the out position. This rectified itself when car was driven.

A few days later, the rear camera stopped working - badge doesn't lift and camera doesn't move to the out position. Display screen changes when putting vehicle into reverse, but is just showing dark screen.

Had a quick look at the fuse box located in the boot space and all fuses ok.

Does anyone have a wiring diagram showing rear camera details?

Also, looking for any information relating to wiring route within the boot lid/space so that I can check for cable damage?

Thank you.

Hi, did you ever get this sorted.? Thanks

 

[Allpag]

Hi, did you ever get this sorted.? Thanks

Hi. Had this checked out by my local independant when my vehicle was in for service and NOC sensors replacement a few months ago. They spent quite some time diagnosing the fault. They were able to see that the camera itself was actually working and the issue seemed to be with the camera control module. They advised to book the car in with Mercedes as the replacement module would need coding to the car and the camera calibrating. I've not done this yet as even though not having the camera operational is a nuisance, I'm loathe to spend ridiculous money with Mercedes to get this sorted. Guess at some point I'll just have to "bite the bullet" and get it done.