Electric exhaust cutout

[rk100]

Has anyone any experience on these - good or bad ?

Here is a link I seen on the USA sites

http://www.dmhperformance.com/ecutout.htm

 

[PhilDR]

We used to use dmh valves in our 'wortec' switching exhaust for all the Aussie v8 stuff we did. About 12-24 months after the first batches went out with them fitted they all corroded and seized owing to the lovely British weather and roads.

We now produce our own valves and remotes here in the UK...

 

[rk100]

We used to use dmh valves in our 'wortec' switching exhaust for all the Aussie v8 stuff we did. About 12-24 months after the first batches went out with them fitted they all corroded and seized owing to the lovely British weather and roads.

We now produce our own valves and remotes here in the UK...

So that's a no no for them Phil!. Do you have valves that will fit my CL65 (215)? If so could you pm me a price?

Cheers

 

[rk100]

I take it you don't do the switch valves for the 65 then Phil?

 

[Gt Two]

is it possible to delete the secondary cat and introduce a valve?

 

[renault12ts]

is it possible to delete the secondary cat and introduce a valve?

Hard to say...but it is possible to start your own thread and ask the question...not hijack this one.

 

[redbaron]

Yes, am curious if this could be done to my CL too?

 

[Gt Two]

Hard to say...but it is possible to start your own thread and ask the question...not hijack this one.

Haha, thank you so much for pointing that out.

I thought it may be beneficial for both the OP and I.

Enjoy your Sunday morning.

 

[rk100]

is it possible to delete the secondary cat and introduce a valve?

I don't think the CL65 has secondary cats from looking a threads on the us sites

 

[Dieselman]

Hard to say...but it is possible to start your own thread and ask the question...not hijack this one.

Getting fed up, are we C?

 

[renault12ts]

Getting fed up, are we C?

Learning from the master W.

 

[PhilDR]

I take it you don't do the switch valves for the 65 then Phil?

Sorry Buddy, not been on here for a bit...

The valves we do ultimately are universal I guess but would need fabrication of a bypass setup to work as you require.