MattCox
Active Member
Could someone point me in the direction of my spark plugs please before i go removing things that i shouldn't!
Thanks, Matt
Thanks, Matt
Last edited:
Embarrasing question!
- Thread starter MattCox
- Start date
-
- Tags
- embarrasing question
- Joined
- Feb 8, 2007
- Messages
- 20,747
- Location
- Portsmouth, Hampshire.
- Car
- E55K SL500 E250X2 Smart44 Brabus Track car E450Cabriolet X350 Pick up
If you have to ask maybe it's best you don;t replace them
OP
OP
MattCox
Active Member
@ Welland99, In the quiet words of the virgin Mary......come again??
@BlackC55, I know what they are and how to change them, god knows i've built project cars from the ground up!! I've just never worked on mercs
@BlackC55, I know what they are and how to change them, god knows i've built project cars from the ground up!! I've just never worked on mercs
- Joined
- Feb 8, 2007
- Messages
- 20,747
- Location
- Portsmouth, Hampshire.
- Car
- E55K SL500 E250X2 Smart44 Brabus Track car E450Cabriolet X350 Pick up
Under the cover at the very top. 3, 5mm allen key bolts
OP
OP
MattCox
Active Member
Cheers 
I'm only used to building old VWs, nothing this modern!
I'm only used to building old VWs, nothing this modern!
Brian WH
MB Enthusiast
Cheers
But why do you need to remove them. Is the engine running rough??
If not leave them alone.
OP
OP
MattCox
Active Member
Its not running to great to be honest. I don't think the last owner bothered too much with services ether. Still not idling right so need to check the MAF/ lambda sensor and possibly replace one or the other. 
Anyway, shes getting a full overhaul and replacing most parts, just for myown piece of mind more than anything.
Anyway, shes getting a full overhaul and replacing most parts, just for myown piece of mind more than anything.
Nik_Endeavour
Active Member
Sorry it was late. I couldn't resist.
I don't remember reading the virgin mary say that.
Is a quote from Snatch!!!
OP
OP
MattCox
Active Member
haha, no bother bud. Yeah, was a quote from Snatch that made me chuckle.
OP
OP
MattCox
Active Member
Made a start on this today but only managed to achieve half an oil change and all filters changed as the auto factors sent me the wrong plugs, only 4 ltrs of oil and the wrong break discs!! So now i have to go out and get the correct parts tomorrow to finish the job.
Here she is looking a bit sorry for its self:
On the lift at home
New and old filters
Another problem, this disc seams to be welded on!! Need to get the heat on it.
Inside the block.
Here she is looking a bit sorry for its self:
On the lift at home
New and old filters
Another problem, this disc seams to be welded on!! Need to get the heat on it.
Inside the block.
