Engine Bay Heat / Air Ventilation section 190 SL 1958.

Page may contain affiliate links. Please see terms for details.

sarky

New Member
Joined
Sep 13, 2021
Messages
5
Location
Leicester
Car
190SL
Hi Guys

I am new to this forum and I am just looking for some help on some finishing touches.

I am trying to finalise the Ventilation system and as you can see from the picture
I have attached there is a gap, what can I use there?

I have gone and had a look at various parts catalogue and haven't seen anything
that is sold to go in that gap.

Thanks for your help in advance.

SarkyBudsBenz-EngDetail-190-2.jpeg
 
You can get re-manufactured ventilation conduits at around 1K£
Have a look at niemollermercedes.de mbclassics.de. redcastleclassics.com in the UK
There are a few American sites who specialize in 190SL, budsbenz is one of them.
Remember to take in to account there are some difference in LH and RH drive.
 
You can get re-manufactured ventilation conduits at around 1K£
Have a look at niemollermercedes.de mbclassics.de. redcastleclassics.com in the UK
There are a few American sites who specialize in 190SL, budsbenz is one of them.
Remember to take in to account there are some difference in LH and RH drive.
@slade1 Thanks for the information, have tried both site but couldn't spot the
ventilation conduit.

Will have a look once more and see if knowing the name helps.

Thanks
 
On the 190 saloon, I have factory parts book, the top one is called scoop (!!!) hutze
Lower air ducts, air ducts luftkanal
You will have to a fair bit of searching, German ebay.de etc
Also try an American site www.mbzponton.org
 
@grober Yeah checked that diagram from what I understand,
I already have item 12 and I need the

Hose for defrosting nozzle 250 mm long​

But doesn't seem to have the part which seals the hole .. :wallbash:
 
Hi Guys

I am new to this forum and I am just looking for some help on some finishing touches.

I am trying to finalise the Ventilation system and as you can see from the picture
I have attached there is a gap, what can I use there?

I have gone and had a look at various parts catalogue and haven't seen anything
that is sold to go in that gap.

Thanks for your help in advance.

SarkyView attachment 118394
There is a specific rubber seal for this. Try Van den Bergs or Werner Karasch.
 
Mercedes classic parts shop - Werner Karasch & Co GmbH


 
Last edited:

Users who are viewing this thread

Back
Top Bottom