engine miss firing

Page may contain affiliate links. Please see terms for details.

alfhoc

New Member
Joined
Jun 30, 2014
Messages
25
How can I detect a mis fire on a 6 cylinder twin spark v6 w202 c240
 
Remove the old plugs, check every plug wire for visual damage using a multimeter check the resistance of every plug wire. In my case the resistance must be 2k ohm. Replace complete set if one is found to be out of specfications. Replace the plugs and new plug wires.
Now check the wiring harness suppling power to the coil packs test all wiring and replace or repair.Remember you cant just plug and play as the computer that drives that system is a fine tuned instruments. All the restiances and voltage must be equal or you will damage the CPU of the computer.
 
^I am scratching my head. Are there two people with same forum name or is there one person who is now giving the answer to himself?

Alfhoc; what gives?
 
Yes after much head scratching and concidering leaving my car at the dealer for days I climed in and did as I discribed in the previous post.now she purs like a kitten.
 

Users who are viewing this thread

Back
Top Bottom