EPC- Visit Workshop

[Louiiee]

Hello guys. After changing my broken MAF and a hose that comes from high pump and goes to the ramp and the bleeding vent, yesterday I did some kickdowns and forced a bit the car goin' to 4k RPM. Today after I started the car and moving for about 500metres and accelerating it to 3.5-4k RPM in 2nd gear and changing it to 3rd it showed me the "EPC- Visit workshop". I pulled over and then restarted the car it doesn't appear again for about 1-2-3 kilos when I started again to go to 3.5-4 RPM.

Thanks guys.

P.S: I also noticed yesterday when I was driving that when I reach the 3.5k RPM to 4k RPM it has some cutoffs of the diesel, seems like I can't use the acceleration for a second because it doesn't get enough diesel.

 

[bob6600]

You profile shows E200 but you say it's a diesel?

Seems you may have air in the system or drawing air in. Possible cause clear fuel lines (Diesel) or perished O rings but most likely to do with the HP pump hose you just changed

 

[Louiiee]

Yep, sorry for not saying it is an Diesel E200 CDI, 2151,85 kw from 2000.