- Joined
- Dec 28, 2007
- Messages
- 8,228
- Car
- Volvo V90 D5 AWD
I alwasy want the expert to be an expert.
It's their expertise I'm interested in and I SO want them to tell me something beneficial to me and my particular problem - especially when I'm stuck
It's their expertise I'm interested in and I SO want them to tell me something beneficial to me and my particular problem - especially when I'm stuck
Check out the pertinent bits in RED below from a pay as you go expert mechanic website ............
Customer Question
I have a Brabus D6 (III) for a CLS 320cdi secondhand with out fitting instructions, the important wiring harness has 5 plugs, plus the main plug to the unit, could you explain how to fit this or point me in the right direction to get information to fit this.Customer Question
Best regards Gary
Submitted: 471 days and 17 hours ago. Category: UK Car
Value: £11
Status: CLOSED
Optional Information
Year: 2005
Make: Mercedes-Benz
Model: CLS 320cdi
Engine: 3000
Posted by Stan 469 days and 16 hours ago.
Expert's Answer
Hello,
1 connector goes to the 1st injector,2- to boost pressure
3- to commonrail pressure sensor.
4- goes to fusebox.
Good Mercedes mechanic will know exactly which plug goes to which sensor if something is unclear. It is almost impossible to mix the plugs up. The plugs are come in between the element and wiring harness.
Best Regards,
Stan
469 days and 11 hours ago.
Customer Reply
Hi Stan, Thanks for your quick response, but l had the unit fitted at weekend. Just to let you no the harness has 5 plugs .2 plugs connect to injector 1 &4
1 plug connect to the quantity control valve 1 plug connect to the commom rail pressure sensor
1 plug connect to the boost pressure sensorThanks anyway Gary
Last edited: