• The Forums are now open to new registrations, adverts are also being de-tuned.

Fault code 2011 E350 CDI Coupe

Yamaman

Active Member
Joined
May 6, 2013
Messages
121
Car
2007 SLK280 auto/ w207 E-Class 350 CDI Coupe
Hi guys
Had this code appear whilst driving the other day , would appreciate your advice on the cause & rectification !
The code was P2453 DPF PRESSURE SENSOR A OUT OF RANGE
Want to get it sorted before any further problems arise
Thanks in advance

Mark
 
well, check pressure sensor connections are solid, holes open to DPF. If you can read live data, see what pressure reading is at engine shut, idle, and higher revs.
 
Exactly what mersum1es says! If you can check live data it will tell you if there's a problem with the two rubber pipes or the DPF itself. It could be a faulty sensor giving incorrect readings.
 
Thanks for your help on this …….can you tell me where the pressure sensor is located on this model & then I can begin to check it ?
Thanks again
Mark
 
images


It will look like this and have two rubber pipes coming up from the exhaust to it
 
There’s a few videos on these on YouTube, it’s on the bulkhead on the right of the engine, viewed from the driver’s seat.
 

Users who are viewing this thread

Back
Top Bottom