finally took the trip to MSL

[tonyg1987]

After years of hearing about MSL on here and social media, finally took the plunge and booked cls to MSL and Torqueflow for decat, map and filters. It’s a 16 hour roundtrip from Aberdeen to Birmingham. Both Immy and Acid are a real nice bunch of guys! Happy with the work they have done and the results speak for themselves. The noise is now better than the c63, and the car is a totally different animal.

 

[Psilonaught]

Christ so your 5.5 was pushing out over 600bhp stock if I read that chart correctly?

 

[Gazwould]

528bhp is the stock reading .

 

[SmartAmg]

528bhp is the stock reading .

That all,

 

[John]

IIRC, those figures are WHP unless things have changed with Acid's setup.

So you need to multiply those figures up by 1.18 to get a conservative crank BHP.

 

[tonyg1987]

528bhp is the stock reading .

528bhp is the stock reading .

it was 528whp with decat. so around 623bhp. i have a baseline dyno that shows 557 standard. so decat is about 70bhp more. the ones after are with kn filter and map. the results are in whp, so times 1.18 - bhp results are around 743bhp and over 1000nm of torque.