Tell me more im interested in fitting gauges to my e 320 , and would like more info ? ie how difficult etc
OP
OP
noogieman
MB Enthusiast
this mod took some time to do.
my guru did this for me, I provided with all parts, he did the nasty job fitting them all.
this is how it's been done, you have to use the dremel or something similar.
the result is BOMBASTIC!
my guru did this for me, I provided with all parts, he did the nasty job fitting them all.
this is how it's been done, you have to use the dremel or something similar.
the result is BOMBASTIC!
Last edited:
OP
OP
noogieman
MB Enthusiast
some more pictures of how to install
braided stainless steel hose, high/low temperature PTFE hose up to 250 degrees celsius is good for this mod.
don't want any melted hose leaking oil.
M12x1.5 thread being used for oil pressure sender = C43 AMG
10 bar sender + 10 bar gauge.
Also available is a 5 bar pressure sender and gauge, use which one you prefer.
I bought a 10 bar kit just to be safe.
for oil temp gauge and temp-sender, you can remove bottom oilpan bolt and replace with an VDO oil temp sender just screw it on.
M14x1.5 thread is used of oil temp sender ( same thread size for oil plug) = C43 AMG
braided stainless steel hose, high/low temperature PTFE hose up to 250 degrees celsius is good for this mod.
don't want any melted hose leaking oil.
M12x1.5 thread being used for oil pressure sender = C43 AMG
10 bar sender + 10 bar gauge.
Also available is a 5 bar pressure sender and gauge, use which one you prefer.
I bought a 10 bar kit just to be safe.
for oil temp gauge and temp-sender, you can remove bottom oilpan bolt and replace with an VDO oil temp sender just screw it on.
M14x1.5 thread is used of oil temp sender ( same thread size for oil plug) = C43 AMG
Last edited:
