Fitting 3rd row seats

Page may contain affiliate links. Please see terms for details.

Stevetempleman13

New Member
Joined
Jul 27, 2021
Messages
3
Location
Kent
Car
Mercedes vito 116 LWB 2016 new shape
Hi,

Just registered today. i have a Mercedes vito 447 LWB 2016 new shape crew van. I want to install a 3rd row of seats. I am trying to find out whether there are fixings below the floor already to enable me to do this. If so is there a template that exists to enable the floor to be cut out to find them. I am about to buy three more of the second row seat brackets for the 3rd row seats.

Steve
 
I'm not 100% sure on the 447 but would doubt that they are there, only way to find out is to lift the current floor to see if any fixing is there. Are you intending fitting rails or just the individual seat mounts??
 
I’m going to initially fit the individual brackets, I might convert to rails at some point. I did come across a drawing showing the brackets laid out but not sure if the holes are there. I will lift the floor and have a look.
 
Fixings will the problem.
It was some years ago but if I remember on a 639 Vito some one had to cut some to insert flat bar, drilled and threaded, below the floor.

Then insurance would like to know.
 
Then insurance would like to know.

And the DVLA, of course.
 
  • Like
Reactions: m80

Users who are viewing this thread

Back
Top Bottom