jon.english68
Active Member
After wiring up the door puddle lights last month I set about installing the front footwell lights, so I bought a pair of LED lamps off eBay
https://www.ebay.co.uk/itm/351668328044
Having read that these lights need connecting to the front SAM and the programming I figured the must be an easier way, well this is what I did,
I pulled out the front overhead console and removed the bulb holders, I the soldered wires to each side of the bulb holder,
The ether end I soldered the LED lamp (1 for each footwell) and ran the wire over the roof lining to the A pillars and down to behind the dash
Then the lamp just fits the existing hole for the lamps in the lower dash panels
Jobs a good en' they light up with the front interior lamps and go out with them
https://www.ebay.co.uk/itm/351668328044
Having read that these lights need connecting to the front SAM and the programming I figured the must be an easier way, well this is what I did,
I pulled out the front overhead console and removed the bulb holders, I the soldered wires to each side of the bulb holder,
The ether end I soldered the LED lamp (1 for each footwell) and ran the wire over the roof lining to the A pillars and down to behind the dash
Then the lamp just fits the existing hole for the lamps in the lower dash panels
Jobs a good en' they light up with the front interior lamps and go out with them