Front fog lights? Which type bulb??

[CLSMark]

Can somebody confirm which bulb fits my 2010 cls

Is it h7 h11 etc etc?

Thanks


Sent from my iPhone using Tapatalk

 

[CLSMark]

Nobody?


Sent from my iPhone using Tapatalk

 

[DSM10000]

Handbook? On-line search?

 

[CLSMark]

Handbook? On-line search?

Halfords says one thing, Fleabay says another [emoji848]


Sent from my iPhone using Tapatalk

 

[190]

If it's a normal incandescent lamp then it will most likely be a H7.

 

[CLSMark]

If it's a normal incandescent lamp then it will most likely be a H7.

I was going to get Cree LED's, would they be a different fitting then?


Sent from my iPhone using Tapatalk

 

[KennyN]

These were the ones i fitted to mine : 2x H11 H8 30W Cree 6000K White Bulb Foglight LED + Resistor Canbus Error Free | eBay

Been illuminating fine for the last two years.

You can access the rear of the fog lights by removing the small front undertray.

Kenny

 

[190]

For it to physically fit you will need an LED lamp designed as a H7 replacement or use an adaptor plate. I presume the fog lamps will be can bus monitored so an error free type of LED will be needed.

 

[CLSMark]

These were the ones i fitted to mine : 2x H11 H8 30W Cree 6000K White Bulb Foglight LED + Resistor Canbus Error Free | eBay

Been illuminating fine for the last two years.

You can access the rear of the fog lights by removing the small front undertray.

Kenny

Big job?


Sent from my iPhone using Tapatalk

 

[KennyN]

Big job?

If you mean the undertray then no , i managed it without lifting the car.

Lamps just plug + play , just remember to tywrap the resisters onto something rather than just leaving them hanging.

Kenny

 

[219]

Halfords ( if you trust them ) would fit them for £4 .

Is that less than the hassle is worth to you ?

If you were to turn up at their door , and ask them to supply and fit two lamps to suit your car , the onus would be on them to supply the right ones , and to lie down on the ground , getting dirty .

 

[CLSMark]

If you mean the undertray then no , i managed it without lifting the car.



Lamps just plug + play , just remember to tywrap the resisters onto something rather than just leaving them hanging.



Kenny

So it's a H11 bulb? I'm still none the wiser, every bulb checker is giving me a different answer [emoji849]


Sent from my iPhone using Tapatalk

 

[KennyN]

The eBay listing i posted was exactly the ones fitted to my CLS and they fitted without issue.

I believe H8 are 35w and H11 are 55w , both have the same base fitting.

Kenny

 

[CLSMark]

The eBay listing i posted was exactly the ones fitted to my CLS and they fitted without issue.



I believe H8 are 35w and H11 are 55w , both have the same base fitting.



Kenny

Thanks again


Sent from my iPhone using Tapatalk

 

[190]

Yes H11.

Sorry for the confusion, I was thinking of the headlight dip and main beam bulbs which are H7's.

 

[CLSMark]

Yes H11.

Sorry for the confusion, I was thinking of the headlight dip and main beam bulbs which are H7's.

No probs