H&R Springs for W203 C32 AMG saloon - part number?

[Bobby Dazzler]

Having looked at various websites, there seems to be a few different part numbers quoted - the position on Eibach springs appears to be similarly inconsistent. I'm looking for springs only.

Although the H&R online catalogue doesn't refer to it (link below), I think 29392-1 is the right part number for the C32 AMG saloon (sedan).


Anyone know the right part number?

2002 Mercedes-Benz C32 AMG Applications || H&R Special Springs, LP

 

[BaldGuy]

Ollies ya Man fella... fitted loads of these.. Only go with H&R, great stance and good comfort... IMO dont touch Eibach unless you have a MK2 Escort or Corsa!!

 

[BlackC55]

Email me the reg and I will double check. I also make it that number.

[email protected]

 

[Bobby Dazzler]

Email me the reg and I will double check. I also make it that number.

[email protected]

Thanks Olly - You have mail!

 

[BenzedUP]

No point going for Eibach as I think the standard C32 spring's are Eibach from factory.

I know the C55's are for sure.

As said go for H&R.

 

[BlackC55]

or coilovers...... They are truly amazing

 

[BenzedUP]

or coilovers...... They are truly amazing

I can vouch for that! ^^

Amazing handling on H&R coilovers!

 

[whitenemesis]

The Billys were brilliant on my S203

 

[Bobby Dazzler]

Olly is supplying, Jay is fitting, Bobby is paying.

Thanks to you both - as usual, excellent service from both PCS in Horndean and Mercland in Nuneaton

 

[BenzedUP]

Olly is supplying, Jay is fitting, Bobby is paying.

Thanks to you both - as usual, excellent service from both PCS in Horndean and Mercland in Nuneaton

What did you go for then? Coilovers or H&R springs?

 

[Bobby Dazzler]

Springs

 

[Bobby Dazzler]

Olly is supplying, Jay is fitting, Bobby is paying.

Thanks to you both - as usual, excellent service from both PCS in Horndean and Mercland in Nuneaton

Springs

Now fitted. Ride comfort is unchanged, and maybe a touch - and I mean a touch - sharper handling. Very very slightly lower but I doubt the untrained eye would even notice - I think Jay was a a little concerned it would be too low for me being so old and boring

I'm really very pleased though.

I think it's as close to standard in ride, handling, and height as I could realistically expect without buying Mercedes springs which are more likely to fail than H&R. They're even a nice metallic graphite colour, and not blue/red/etc. Result.

I wanted standard but better quality, and I think that's exactly what I've got.

Thanks to PCS in Horndean and Mercland in Nuneaton. Great service from both, but you didn't need me to tell you that.

 

[jaymanek]

Glad your happy....

For members, this represents how far his car is off the ground

 

[st4]

How easy is it with coil overs to get the camber back in within spec? Proved a nightmare on my E class.

 

[jaymanek]

He hasnt got coil overs, just swapped to H&R Springs.