• The Forums are now open to new registrations, adverts are also being de-tuned.

hard wire dash cam 24/7 running

kendog91

Active Member
Joined
Jun 25, 2020
Messages
261
Location
DONCASTER
Car
W212 E220 CDI AMG SPORT
Possibly on the box , the box writing is purposely blurred , I strongly suspect there is some not so favourable information .
 
Possibly on the box , the box writing is purposely blurred , I strongly suspect there is some not so favourable information .
this is the info on the box itself,

SPECIFICATIONS:
  • Length of input wire: 50cm
  • Length of output MICRO USB wire: 400cm (Approx.)
  • Input: 12V-28V DC
  • Output: 5V DC
  • Max AMP: 2A
  • Weight: 120gms approx.
 
assuming it is 11.4v cut off, what would be the fuse locations for ignition on and ignition off
 
Blackvue Power Magic Pro min voltage is 12v cut off so 50% charged. Given starter batteries aren't deep discharge (like a leisure battery) I think below 12v is going to compromise durability, particularly if the vehicle stands for a couple of weeks at that low level.
 
If you need to run it 24/7 I think it would be a good idea to use a trickle charger. Without it, then your battery will flatten in no time and repeated heavy discharging will milk it prematurely.
 
Or buy a camera that wakes up on a G Shock and powers down on set intervals after being parked .
 
If you need to run it 24/7 I think it would be a good idea to use a trickle charger. Without it, then your battery will flatten in no time and repeated heavy discharging will milk it prematurely.
My spellchecker is out to get me, ”milk it” should be “kill it”.
 

Users who are viewing this thread

Back
Top Bottom