Hi there.
Tested the drivers heated seat on my W210 and found it to be open circuit.
Tried the (working) passenger side and got a reading of about 2.5 Ohms.
I have 12v at the loom and the switch and fuse are fine.
So it looks like the element is bost.
Hoiw hard is it to replace? Is it like an 'overlay' or is weaved in to the leather seat cover?
Thanks for any replies.
Tested the drivers heated seat on my W210 and found it to be open circuit.
Tried the (working) passenger side and got a reading of about 2.5 Ohms.
I have 12v at the loom and the switch and fuse are fine.
So it looks like the element is bost.
Hoiw hard is it to replace? Is it like an 'overlay' or is weaved in to the leather seat cover?
Thanks for any replies.