Evening all,
Well after a woeful day I thought I would reach out here for some advice.
I bought an Icar soft MB V2.0 to diagnose a fault code on my 2011 W204 Diesel after it began to display "no abs/esp inoperative" warning was shown on the dash.
No i received the unit this morning and plugged it in. Ran a scan and it didn't pick up any fault codes.
I ran through several tests and nothing was found.
So I decided to disconnect. I went to run the car but now it feels like the electronic parking brake is engaged when I try to drive. The car drove normally even with the codes showing.
I'm flapping now as I haven't changed anything in the settings.
Any help would be greatly appreciated.
Well after a woeful day I thought I would reach out here for some advice.
I bought an Icar soft MB V2.0 to diagnose a fault code on my 2011 W204 Diesel after it began to display "no abs/esp inoperative" warning was shown on the dash.
No i received the unit this morning and plugged it in. Ran a scan and it didn't pick up any fault codes.
I ran through several tests and nothing was found.
So I decided to disconnect. I went to run the car but now it feels like the electronic parking brake is engaged when I try to drive. The car drove normally even with the codes showing.
I'm flapping now as I haven't changed anything in the settings.
Any help would be greatly appreciated.