Icarsoft mbii - not connecting to a module

DavidL

Active Member
Joined
Feb 3, 2014
Messages
872
Car
s211 E55 , s203 C55
I wondered if my 211 e55 looked slightly uneven on the drive, it could just be the way it was parked. But I have acquired a mbii so I thought I'd have a play. But once in I found that, on the manual diagnostic, there is a suspension listing but I got an error code when trying to access it. I could access things that aren't there (like the heated steering wheel - no errors) and the parktronic that did have a couple of errors.
Is there an obvious reason it couldn't read it?
 

OneForTheRoad

MB Enthusiast
Joined
Apr 20, 2015
Messages
4,068
Location
uk.
Car
2017 e350 c207 .. +65 ford kuga 2.0 cdi zetec awd..
You could try with the engine on , or engine off 🤔
 
OP
OP
D

DavidL

Active Member
Joined
Feb 3, 2014
Messages
872
Car
s211 E55 , s203 C55
It seems to connect with the ignition on or off although I didn't try with the engine running. No harm in trying that. Thanks
 
OP
OP
D

DavidL

Active Member
Joined
Feb 3, 2014
Messages
872
Car
s211 E55 , s203 C55
sorted. Updated icarsoft software and re ran with the car running. No idea which made the difference but it did and all is well.
 

Users who are viewing this thread

Top Bottom